Send comments to nx5000-docfeedback@cisco.com
8-12
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 8 Fibre Channel Commands
cfs staggered-merge
cfs staggered-merge
CFS can merge the data from multiple VSANs. To disable this feature, use the no form of this command.
cfs staggered-merge enable
no cfs staggered-merge enable
Syntax Description
Command Default Staggered merge is disabled.
Command Modes Configuration mode
Command History
Examples The following example shows how to enable CFS staggered merge:
switch(config)# cfs staggered-merge enable
Related Commands
enable Enables the CFS staggered-merge option.
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
show cfs status Displays whether staggered merge is enabled.
To Next Page
Loading...
