Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference

Send comments to nx5000-docfeedback@cisco.com
7-21
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 7 System Management Commands
ntp commit
ntp commit
To apply the pending configuration pertaining to the Network Time Protocol (NTP) Cisco Fabric
Services (CFS) distribution session in progress in the fabric, use the ntp commit command.
ntp commit
Syntax Description This command has no other arguments or keywords.
Command Default None
Command Modes Configuration mode
Command History
Examples The following example shows how to commit changes to the active NTP configuration:
switch(config)# ntp commit
Related Commands
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
ntp distribute Enables CFS distribution for NTP.
show ntp Displays NTP information.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English