Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference

Send comments to nx5000-docfeedback@cisco.com
1-46
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 1 Basic System Commands
gunzip
gunzip
To uncompress a compressed file, use the gunzip command.
gunzip [filesystem:] [//server/] [directory] filename
Syntax Description
Note There can be no spaces in the filesystem://server/directory/filename string. Individual elements of this
string are separated by colons (:) and slashes (/).
Command Default None
Command Modes EXEC mode
Command History
Usage Guidelines The compressed filename must have the .gz extension.
The Cisco NX-OS software uses Lempel-Ziv 1977 (LZ77) coding for compression.
Examples This example shows how to uncompress a compressed file:
switch# gunzip run_cnfg.cfg.gz
Related Commands
filesystem: (Optional) Name of the file system. Valid values are bootflash, modflash,
or volatile.
//server/ (Optional) Name of the server. Valid values are ///, //module-1/, //sup-1/,
//sup-active/, or //sup-local/. The double slash (//) is required.
directory (Optional) Name of a directory. The directory name is case sensitive.
filename Name of the file to uncompress. The filename is case sensitive.
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
dir Displays the directory contents.
gzip Compresses a file.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English