Cisco AP775A - Nexus Converged Network Switch 5010

Send comments to nx5000-docfeedback@cisco.com
7-44
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 7 System Management Commands
show ntp timestamp-status
show ntp timestamp-status
To display the Network Time Protocol timestamp information, use the show ntp timestamp-status
command.
show ntp timestamp-status
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes EXEC mode
Command History
Examples This example displays the NTP timestamp status:
switch(config)# show ntp timestamp-status
Release Modification
4.0(0)N1(1a) This command was introduced.