Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference

Send comments to nx5000-docfeedback@cisco.com
1-98
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 1 Basic System Commands
show running-config
show running-config
To display the running configuration, use the show running-config command.
show running-config [all]
Syntax Description
Command Default Displays only the configured information.
Command Modes EXEC mode
Command History
Examples This example shows how to display the changes that you have made to the running configuration:
switch# show running-config
This example shows how to display the entire running configuration, including the default values:
switch# show running-config all
Related Commands
all (Optional) Displays all the default and configured information.
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
copy running-config
startup-config
Copies the running configuration to the startup configuration.
show running-config
diff
Displays the differences between the running configuration and the startup
configuration.
show startup-config Displays the startup configuration.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English