Send comments to nx5000-docfeedback@cisco.com
6-118
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 6 Security Commands
show startup-config security
show startup-config security
To display user account, SSH server, and Telnet server configuration information in the startup
configuration, use the show startup-config security command.
show startup-config security
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes EXEC mode
Command History
Examples This example shows how to display the user account, SSH server, and Telnet server information in the
startup configuration:
switch# show startup-config security
Release Modification
4.0(0)N1(1a) This command was introduced.
To Next Page
Loading...
