Send comments to nx5000-docfeedback@cisco.com
8-80
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 8 Fibre Channel Commands
fdmi suppress-updates
fdmi suppress-updates
To suppress FDMI updates, use the fdmi suppress-updates command.
fdmi suppress-updates vsan vsan-id
Syntax Description
Command Default By default, FDMI updates are not suppressed.
Command Modes Configuration mode
Command History
Examples The following example suppresses FDMI updates in VSAN 1:
switch# fdmi suppress-updates vsan 1
vsan vsan-id Specifies a VSAN ID. The range is 1 to 4093.
Release Modification
4.0(0)N1(1a) This command was introduced.
To Next Page
Loading...
