Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference

Send comments to nx5000-docfeedback@cisco.com
9-11
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 9 Fibre Channel Show Commands
show fcalias
show fcalias
To display the member name information in a Fibre Channel alias (fcalias), use the show fcalias
command.
show fcalias [name fcalias-name] [pending] [vsan vsan-id]
Syntax Description
Command Default Displays a list of all global fcaliases and all VSAN-dependent fcaliases.
Command Modes EXEC mode.
Command History
Usage Guidelines To make use of fcaliases as device names instead of using the cryptic device name, add only one member
per fcalias.
Examples The following example displays fcalias configuration information:
switch# show fcalias vsan 1
Related Commands
name fcalias-name (Optional) Displays fcalias information for a specific name. The maximum
length is 64.
pending (Optional) Displays pending fcalias information.
vsan vsan-id (Optional) Displays fcalias information for a VSAN. The range is 1 to 4093.
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
fcalias name Configures fcalias names.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English