Send comments to nx5000-docfeedback@cisco.com
2-23
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 2 Ethernet Commands
ip igmp snooping (EXEC)
ip igmp snooping (EXEC)
To enable Internet Group Management Protocol (IGMP), use the ip igmp snooping command. To
disable IGMP snooping, use the no form of this command.
ip igmp snooping
no ip igmp snooping
Syntax Description This command has no other arguments or keywords.
Command Default IGMP snooping is enabled.
Note If the global setting is disabled, then all VLANs are treated as disabled, whether they are enabled or not.
Command Modes EXEC mode
Command History
Examples This example shows how to enable IGMP snooping:
switch# ip igmp snooping
Related Commands
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
show ip igmp snooping Displays IGMP snooping information and configuration.
To Next Page
Loading...
