Send comments to nx5000-docfeedback@cisco.com
5-21
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 5 Quality of Service Commands
show class-map type queuing
show class-map type queuing
To display type queuing class maps, use the show class-map type queuing command.
show class-map type queuing [class-map-name]
Syntax Description
Defaults Displays all type queuing class maps if no class map name is specified.
Command Modes Any command mode
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display all type queuing class maps:
switch(config)# show class-map type queuing
Related Commands
class-map-name Named class map.
Release Modification
4.1(3)N1(1) This command was introduced.
Command Description
class-map Creates or modifies a class map.
To Next Page
Loading...
