Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference

Send comments to nx5000-docfeedback@cisco.com
1-109
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 1 Basic System Commands
show terminal
show terminal
To display information about the terminal configuration for a session, use the show terminal command.
show terminal
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes EXEC mode
Command History
Examples This example shows how to display information about the terminal configuration for a session:
switch# show terminal
Related Commands
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
terminal length Configures the terminal display length for the session.
terminal
session-timeout
Configures the terminal inactive session timeout for a session.
terminal type Configures the terminal type for a session.
terminal width Configures the terminal display width for a session.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English