Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference

Send comments to nx5000-docfeedback@cisco.com
7-20
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 7 System Management Commands
ntp abort
ntp abort
To discard the Network Time Protocol (NTP) Cisco Fabric Services (CFS) distribution session in
progress, use the ntp abort command.
ntp abort
Syntax Description This command has no other arguments or keywords.
Command Default None
Command Modes Configuration mode
Command History
Examples The following example shows how to discard the NTP CFS distribution session in progress:
switch(config)# ntp abort
Related Commands
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
ntp distribute Enables CFS distribution for NTP.
show ntp Displays NTP information.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English