Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference

Send comments to nx5000-docfeedback@cisco.com
9-42
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 9 Fibre Channel Show Commands
show san-port-channel
show san-port-channel
Use the show san-port-channel command to view information about existing SAN port channel
configurations.
show san-port-channel {compatibility-parameters | consistency [detail] | database [interface
san-port-channel port] | summary | usage}
Syntax Description
Command Default None
Command Modes EXEC mode.
Command History
Examples The following example displays the SAN port channel summary:
switch# show san-port-channel summary
The following example displays the SAN port channel compatibility parameters:
switch# show san-port-channel compatibility-parameters
The following example displays the SAN port channel database:
switch# show san-port-channel database
The following example displays the consistency status of the SAN port channel database:
switch# show san-port-channel consistency
The following example displays detailed information about the consistency status of the SAN port
channel database:
switch# show san-port-channel consistency detail
compatibility-parameters Displays compatibility parameters.
consistency Displays the database consistency information of all modules.
detail (Optional) Displays detailed database consistency information.
database Displays SAN port channel database information.
interface san-port-channel
port
(Optional) Specifies the SAN port channel number. The range is 1 to
256.
summary Displays SAN port channel summary.
usage Displays SAN port channel number usage.
Release Modification
4.0(0)N1(1a) This command was introduced.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English