Send comments to nx5000-docfeedback@cisco.com
4-15
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 4 Fabric Extender Commands
show fex
show fex
To display information about a specific Fabric Extender or all attached chassis, use the show fex
command.
show fex [chassis_ID [detail]]
Syntax Description
Command Default None
Command Modes EXEC mode
Command History
Examples This example shows how to display information about all attached Fabric Extender chassis:
switch# show fex
Related Commands
chassis_ID (Optional) Fabric Extender chassis ID. The chassis ID range is from 100 to
199.
detail (Optional) Displays a detailed listing.
Release Modification
4.0(1a)N2(1) This command was introduced.
Command Description
fex Creates a Fabric Extender and enters Fabric Extender configuration mode.
To Next Page
Loading...
