Send comments to nx5000-docfeedback@cisco.com
5-27
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 5 Quality of Service Commands
system jumbomtu
system jumbomtu
To define the upper bound of any MTU in the system, use the system jumbomtu command.
system jumbomtu [value]
Syntax Description
Command Default 9216 bytes
Command Modes Global configuration
Command History
Examples This example shows how to define the upper bound of any MTU in the system:
switch(config)# system jumbomtu 9216
Related Commands
value The jumbomtu value. The range is 2240-9216.
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
show interface Displays the jumbo MTU frames sent and received on the specified interface.
To Next Page
Loading...
