Send comments to nx5000-docfeedback@cisco.com
6-100
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 6 Security Commands
show access-lists
show access-lists
To display all IPv4 and MAC access control lists (ACLs) or a specific ACL, use the show access-lists
command.
show access-lists [access-list-name]
Syntax Description
Command Default The switch shows all ACLs, unless you use the access-list-name argument to specify an ACL.
Command Modes EXEC mode
Command History
Examples This example shows how to all IPv4 and MAC ACLs on the switch:
switch# show access-lists
Related Commands
access-list-name (Optional) Name of an ACL to show.
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
ip access-list Configures an IPv4 ACL.
mac access-list Configures a MAC ACL.
show ip access-lists Displays all IPv4 ACLs or a specific IPv4 ACL.
show mac access-lists Displays all MAC ACLs or a specific MAC ACL.
To Next Page
Loading...
Need help?
General
