Cisco AP775A - Nexus Converged Network Switch 5010

Send comments to nx5000-docfeedback@cisco.com
9-46
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 9 Fibre Channel Show Commands
show topology
show topology
To display topology information for connected SAN switches, use the show topology command.
show topology [vsan vsan-id]
Syntax Description
Command Default None
Command Modes EXEC mode.
Command History
Examples The following example displays topology information:
switch# show topology
vsan vsan-id (Optional) Displays information for a VSAN. The range is 1 to 4093.
Release Modification
4.0(0)N1(1a) This command was introduced.