Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference

Send comments to nx5000-docfeedback@cisco.com
9-36
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 9 Fibre Channel Show Commands
show npv traffic-map
show npv traffic-map
To display N port virtualization (NPV) traffic maps, use the show npv traffic-map command.
show npv traffic-map
Syntax Description This command has no other keywords or arguments.
Command Default None
Command Modes EXEC mode.
Command History
Usage Guidelines The show npv traffic-map command is available only when the switch is in NPV mode.
Examples The following example displays the current status of NPV:
switch# show npv traffic-map
Related Commands
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
show npv flogi-table Displays the information about NPV FLOGI session.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English