Send comments to nx5000-docfeedback@cisco.com
4-17
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 4 Fabric Extender Commands
show fex version
show fex version
To display the version information about a Fabric Extender, use the show fex version command.
show fex chassis_ID version
Syntax Description
Command Default None
Command Modes EXEC mode
Command History
Examples This example shows how to display the version information about a Fabric Extender:
switch# show fex version
Related Commands
chassis_ID Fabric Extender chassis ID. The chassis ID range is from 100 to 199.
Release Modification
4.0(1a)N2(1) This command was introduced.
Command Description
fex Creates a Fabric Extender and enters Fabric Extender configuration mode.
To Next Page
Loading...
