Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference

Send comments to nx5000-docfeedback@cisco.com
3-11
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 3 Ethernet Show Commands
show mac-address-table notification
show mac-address-table notification
To display notifications about the MAC address table, use the show mac-address-table notification
command.
show mac-address-table notification {mac-move | threshold}
Syntax Description
Command Default None
Command Modes EXEC mode
Command History
Examples This example shows how to display MAC address move notifications:
switch# show mac-address-table notification mac-move
Related Commands
mac-move Shows notification messages about MAC addresses that were moved.
threshold Shows notification messages sent when the MAC address table threshold
was exceeded.
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
show
mac-address-table
Displays information about the MAC address table.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English