Cisco AP775A - Nexus Converged Network Switch 5010

Send comments to nx5000-docfeedback@cisco.com
7-31
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 7 System Management Commands
show logging nvram
show logging nvram
Use the show logging nvram command to display the messages in the NVRAM log.
show logging nvram [last number-lines]
Syntax Description
Command Default None
Command Modes EXEC mode
Command History
Examples This example shows how to display the last 20 messages in the NVRAM log:
switch# show logging nvram last 20
last number-lines (Optional) Enters the number of lines to display. The specified number of lines is
displayed. Specify from 1 to 100 lines.
Release Modification
4.0(0)N1(1a) This command was introduced.