Send comments to nx5000-docfeedback@cisco.com
1-105
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 1 Basic System Commands
show system cores
show system cores
To display the core filename, use the show system cores command.
show system cores
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes EXEC mode
Command History
Usage Guidelines Use the system cores command to configure the system core filename.
Examples This example shows how to display destination information for the system core files:
switch# show system cores
Related Commands
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
system cores Configures the system core filename.
To Next Page
Loading...
