Send comments to nx5000-docfeedback@cisco.com
3-39
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 3 Ethernet Show Commands
show vlan id
show vlan id
To display information and statistics for an individual VLAN or a range of VLANs, use the show vlan
id command.
show vlan id {vlan-id}
Syntax Description
Command Default None
Command Modes EXEC mode
Command History
Usage Guidelines Use this command to display information and statistics on an individual VLAN or a range of VLANs,
including private VLANs.
Note You can also display information about individual VLANs using the show vlan name command.
Examples This example shows how to display information for the individual VLAN 5:
switch# show vlan id 5
Related Commands
vlan-id Specifies the VLAN or range of VLANs that you want to display.
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
show vlan Displays information about VLANs on the switch.
To Next Page
Loading...
