Send comments to nx5000-docfeedback@cisco.com
9-12
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 9 Fibre Channel Show Commands
show fcdomain
show fcdomain
To display the Fibre Channel domain (fcdomain) information, use the show fcdomain command.
show fcdomain [address-allocation [cache] | allowed | domain-list | fcid persistent [unused] |
pending [vsan vsan-id] | pending-diff [vsan vsan-id] | session-status [vsan vsan-id] | statistics
[interface {fc slot/port [vsan vsan-id] } | san-port-channel port [vsan vsan-id]] | status | vsan
vsan-id]
Syntax Description
Command Default None
Command Modes EXEC mode.
Command History
Usage Guidelines When you enter the show fcdomain with no arguments, all VSANs are displayed. The VSANs should be
active or you will get an error.
address-allocation (Optional) Displays statistics for the FC ID allocation.
cache (Optional) Reassigns the FC IDs for a device (disk or host) that exited and
reentered the fabric for the principal switch. In the cache content, VSAN
refers to the VSAN that contains the device, WWN refers to the device that
owned the FC IDs, and mask refers to a single or entire area of FC IDs.
allowed (Optional) Displays a list of allowed domain IDs.
domain-list (Optional) Displays a list of domain IDs provided by the principal switch.
fcid persistent (Optional) Displays persistent FC IDs (across reboot).
pending (Optional) Displays the pending configuration.
pending-diff (Optional) Displays the difference between the running configuration and
the pending configuration.
session-status (Optional) Displays the last action performed by FC domain.
vsan vsan-id (Optional) Specifies a VSAN ID. The range is 1 to 4093.
statistics (Optional) Displays the statistics of FC domain.
interface (Optional) Specifies an interface.
fc slot/port (Optional) Specifies a Fibre Channel interface.
san-port-channel port (Optional) Specifies a SAN port channel interface. The range is 1 to 128.
status (Optional) Displays all VSAN-independent information in FC domain.
Release Modification
4.0(0)N1(1a) This command was introduced.
To Next Page
Loading...
Need help?
General
