Cisco AP775A - Nexus Converged Network Switch 5010 - Show Ntp Peers

Send comments to nx5000-docfeedback@cisco.com
7-42
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 7 System Management Commands
show ntp peers
show ntp peers
To display information about Network Time Protocol (NTP) peers, use the show ntp peers command.
show ntp peers
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes EXEC mode
Command History
Examples This example displays information about NTP peers:
switch(config)# show ntp peers
Related Commands
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
show ntp peer-status Displays status information about NTP peers.