Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference

Send comments to nx5000-docfeedback@cisco.com
6-7
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 6 Security Commands
aaa authentication login error-enable
aaa authentication login error-enable
To configure that the AAA authentication failure message displays on the console, use the aaa
authentication login error-enable command. To revert to the default, use the no form of this command.
aaa authentication login error-enable
no aaa authentication login error-enable
Syntax Description This command has no arguments or keywords.
Command Default Disabled.
Command Modes Configuration mode
Command History
Usage Guidelines When you log in, the login is processed by rolling over to the local user database if the remote AAA
servers do not respond. In this situation, the following message is displayed if you have enabled the
displaying of login failure messages:
Remote AAA servers unreachable; local authentication done.
Remote AAA servers unreachable; local authentication failed.
Examples This example shows how to enable the display of AAA authentication failure messages to the console:
switch(config)# aaa authentication login error-enable
This example shows how to disable the display of AAA authentication failure messages to the console:
switch(config)# no aaa authentication login error-enable
Related Commands
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
show aaa
authentication
Displays the status of the AAA authentication failure message display.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English