Cisco AP775A - Nexus Converged Network Switch 5010

Send comments to nx5000-docfeedback@cisco.com
8-66
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 8 Fibre Channel Commands
fcs register
fcs register
To register FCS attributes, use the fcs register command. To disable this feature, use the no form of the
command.
fcs register
no fcs register
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes Configuration mode
Command History
Examples The following example shows how to register FCS attributes:
switch(config)# fcs register
Related Commands
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
show fcs Displays fabric configuration server information.