Send comments to nx5000-docfeedback@cisco.com
1-18
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 1 Basic System Commands
configure session
configure session
To create or modify a configuration session, use the configure session command.
configure session name
Syntax Description
Command Default None
Command Modes EXEC mode
Command History
Examples This example shows how to create a configuration session:
switch# configure session MySession
switch(config-s)#
Related Commands
name Name of the session. The name is a case-sensitive alphanumeric string up to
63 characters.
Release Modification
4.0(1a)N1(1) This command was introduced.
Command Description
show configuration
session
Displays information about the configuration sessions.
To Next Page
Loading...
