Send comments to nx5000-docfeedback@cisco.com
8-49
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 8 Fibre Channel Commands
fcdomain abort vsan
fcdomain abort vsan
To flush cached data without committing and release the lock, use the fcdomain abort vsan command.
To disable the flushing of cached data, use the no form of the command.
fcdomain abort vsan vsan-id
no fcdomain abort vsan vsan-id
Syntax Description
Command Default Enabled.
Command Modes Configuration mode
Command History
Examples The following example shows how to flush cached data:
switch(config)# fcdomain abort vsan 10
Related Commands
vsan-id Specifies a VSAN ID. The range is 1 to 4093.
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
fcdomain Configures Fibre Channel domain features.
fcdomain commit vsan Commits cached data and releases the lock.
show fcdomain Displays global information about the Fibre Channel domain configurations.
To Next Page
Loading...
