Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference

Send comments to nx5000-docfeedback@cisco.com
1-125
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 1 Basic System Commands
write erase
write erase
To erase configurations in persistent memory areas, use the write erase command.
write erase [boot | debug]
Syntax Description
Command Default Erases all configuration in persistent memory.
Command Modes EXEC mode
Command History
Usage Guidelines You can use this command to erase the startup configuration in the persistent memory when information
is corrupted or otherwise unusable. Erasing the startup configuration returns the switch to its initial state.
Examples This example shows how to erase the startup configuration:
switch# write erase
This example shows how to erase the debug configuration in the persistent memory:
switch# write erase debug
Related Commands
boot (Optional) Erases only the boot configuration.
debug (Optional) Erases only the debug configuration.
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
copy running-config
startup-config
Copies the running configuration to the startup configuration.
show running-config Displays the startup configuration.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English