Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference

Send comments to nx5000-docfeedback@cisco.com
3-17
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 3 Ethernet Show Commands
show running-config vlan
show running-config vlan
To display the running configuration for a specified VLAN, use the show running-config vlan
command.
show running-config vlan vlan-id
Syntax Description
Command Default None
Command Modes EXEC mode
Command History
Usage Guidelines This command provides information on the specified VLAN, including private VLANs.
The display varies with your configuration. If you have configured the VLAN name, shutdown status, or
suspended status, these are also displayed.
Examples This example shows how to display the running configuration for VLAN 5:
switch# show running-config vlan 5
Related Commands
vlan-id Number of VLAN or range of VLANs. Valid numbers are 1 to 4096.
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
show vlan Displays information about all the VLANs on the switch.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English