Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference

Send comments to nx5000-docfeedback@cisco.com
1-89
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 1 Basic System Commands
show license host-id
show license host-id
To display the serial number (host ID) of the switch chassis to use for licensing, use the show license
host-id command.
show license host-id
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes EXEC mode
Command History
Usage Guidelines The serial number is the entire string that appears after the colon (:) as shown in the example.
Examples This example shows how to display the host ID, required to request node-locked licenses:
switch# show license host-id
License hostid: VDH=FLC12300568
Related Commands
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
install license Installs a license.
show license Displays license information.
show license usage Displays license usage information.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English