Cisco AP775A - Nexus Converged Network Switch 5010

Send comments to nx5000-docfeedback@cisco.com
6-9
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 6 Security Commands
aaa group server radius
aaa group server radius
To create a RADIUS server group and enter RADIUS server group configuration mode, use the aaa
group server radius command. To delete a RADIUS server group, use the no form of this command.
aaa group server radius group-name
no aaa group server radius group-name
Syntax Description
Command Default None
Command Modes Configuration mode
Command History
Examples This example shows how to create a RADIUS server group and enter RADIUS server configuration
mode:
switch(config)# aaa group server radius RadServer
switch(config-radius)#
This example shows how to delete a RADIUS server group:
switch(config)# no aaa group server radius RadServer
Related Commands
group-name RADIUS server group name.
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
show aaa groups Displays server group information.