Cisco AP775A - Nexus Converged Network Switch 5010 - Fabric Profile

Send comments to nx5000-docfeedback@cisco.com
8-37
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 8 Fibre Channel Commands
fabric profile
fabric profile
To utilize a preset QoS setting, use the fabric profile command. To restore the default, use the no form
of the command.
fabric profile {reliable-multicast | unicast-optimized}
no fabric profile
Syntax Description
Command Default Unicast-optimized.
Command Modes Configuration mode
Command History
Examples The following example sets the fabric to ensure reliable delivery of multicast traffic:
switch(config)# fabric profile reliable-multicast
The following example sets the fabric profile to the default value:
switch(config)# no fabric profile
Related Commands
reliable-multicast Optimizes the QoS parameters in the fabric to ensure reliable delivery of
multicast traffic.
unicast-optimized Optimizes the QoS parameters in the fabric for unicast traffic.
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
show fabric profile Displays the current setting of the fabric.