Send comments to nx5000-docfeedback@cisco.com
8-36
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 8 Fibre Channel Commands
discover scsi-target
The following example shows how to discover SCSI targets for the specified VSAN (1) and FCID
(0x9c03d6):
switch# discover scsi-target vsan 1 fcid 0x9c03d6 os aix
discover scsi-target vsan 1 fcid 0x9c03d6
VSAN: 1 FCID: 0x9c03d6 PWWN: 00:00:00:00:00:00:00:00
PRLI RSP: 0x01 SPARM: 0x0012...
The following example begins discovering targets from a customized list assigned to the Linux operating
system:
switch# discover scsi-target custom-list os linux
discovery started
To Next Page
Loading...
