Send comments to nx5000-docfeedback@cisco.com
3-13
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 3 Ethernet Show Commands
show mac-address-table
This example shows how to display the information about the MAC address table for a specific interface:
switch# show mac address-table interface ethernet 1/3
This example shows how to display the static entries in the MAC address table:
switch# show mac address-table static
This example shows how to display the entries in the MAC address table for a specific VLAN:
switch# show mac address-table vlan 5
Related Commands Command Description
mac address-table
static
Adds static entries to the MAC address table or configures a static MAC
address with IGMP snooping disabled for that address.
show
mac-address-table
aging-time
Displays information about the time-out values for the MAC address table.
show
mac-address-table
count
Displays the number of entries currently in the MAC address table.
show
mac-address-table
notifications
Displays information about notifications about the MAC address table.
To Next Page
Loading...
