Send comments to nx5000-docfeedback@cisco.com
2-77
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 2 Ethernet Commands
spanning-tree port type edge bpdufilter default
Examples This example shows how to enable BPDU Filtering globally on all spanning tree edge operational ports
by default:
switch(config)# spanning-tree port type edge bpdufilter default
Related Commands Command Description
show spanning-tree
summary
Displays the information about the spanning tree configuration.
spanning-tree
bpdufilter
Enables BPDU Filtering on the interface.
spanning-tree port
type edge
Configures an interface as a spanning tree edge port.
To Next Page
Loading...
