Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference

Send comments to nx5000-docfeedback@cisco.com
2-83
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 2 Ethernet Commands
spanning-tree port type network
Examples This example shows how to configure an interface connected to a switch or bridge as a spanning tree
network port:
switch(config-if)# spanning-tree port type network
Related Commands Command Description
show spanning-tree
interface
Displays information about the spanning tree configuration per specified
interface.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English