Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference

Send comments to nx5000-docfeedback@cisco.com
1-5
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 1 Basic System Commands
cd
cd
To change the current working directory in the device file system, use the cd command.
cd [filesystem:] [//server/] directory
Syntax Description
Note There can be no spaces in the filesystem://server/directory string. Individual elements of this string are
separated by colons (:) and slashes (/).
Command Default None
Command Modes EXEC mode
Command History
Usage Guidelines Use the pwd command to verify the current working directory.
Examples This example shows how to change the current working directory on the current file system:
switch# cd my-scripts
This example shows how to change the current working directory to another file system:
switch# cd volatile:
Related Commands
filesystem: (Optional) Name of the file system. Valid values are bootflash or volatile.
//server/ (Optional) Name of the server. Valid values are ///, //module-1/, //sup-1/,
//sup-active/, or //sup-local/. The double slash (//) is required.
directory Name of the destination directory. The directory name is case sensitive.
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
pwd Displays the current working directory name.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English