Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference

Send comments to nx5000-docfeedback@cisco.com
5-10
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 5 Quality of Service Commands
match dscp
• Specify a range of values separated by a dash
• Specify a noncontiguous list of values separated by commas
This command does not require a license.
Examples This example shows how to match on DSCP value af21:
switch(config)# class-map my_test
switch(config-cmap-qos)# match dscp af21
Related Commands
cs2 CS2 (precedence 2) dscp (010000)—decimal value 16
cs3 CS3 (precedence 3) dscp (011000)—decimal value 24
cs4 CS4 (precedence 4) dscp (100000)—decimal value 32
cs5 CS5 (precedence 5) dscp (101000)—decimal value 40
cs6 CS6 (precedence 6) dscp (110000)—decimal value 48
cs7 CS7 (precedence 7) dscp (111000)—decimal value 56
default Default dscp (000000)—decimal value 0
ef EF dscp (101110)—decimal value 46
Table 1 Standard DSCP Values (continued)
List of DSCP Values
Command Description
show class-map Displays class maps.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English