Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference

Send comments to nx5000-docfeedback@cisco.com
6-24
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 6 Security Commands
deny (IPv4)
syslog—System Logger (514)
tacacs—TAC Access Control System (49)
talk—Talk (517)
tftp—Trivial File Transfer Protocol (69)
time—Time (37)
who—Who service (rwho, 513)
xdmcp—X Display Manager Control Protocol (177)
Examples This example shows how to configure an IPv4 ACL named acl-lab-01 with rules that deny all TCP and
UDP traffic from the 10.23.0.0 and 192.168.37.0 networks to the 10.176.0.0 network and a final rule that
permits all other IPv4 traffic:
switch(config)# ip access-list acl-lab-01
switch(config-acl)# deny tcp 10.23.0.0/16 10.176.0.0/16
switch(config-acl)# deny udp 10.23.0.0/16 10.176.0.0/16
switch(config-acl)# deny tcp 192.168.37.0/16 10.176.0.0/16
switch(config-acl)# deny udp 192.168.37.0/16 10.176.0.0/16
switch(config-acl)# permit ip any any
Related Commands Command Description
ip access-list Configures an IPv4 ACL.
permit (IPv4) Configures a permit rule in an IPv4 ACL.
remark Configures a remark in an IPv4 ACL.
show ip access-list Displays all IPv4 ACLs or one IPv4 ACL.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English