Send comments to nx5000-docfeedback@cisco.com
6-36
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 6 Security Commands
deny (MAC)
Examples This example shows how to configure a MAC ACL named mac-ip-filter with rules that permit any
non-IPv4 traffic between two groups of MAC addresses:
switch(config)# mac access-list mac-ip-filter
switch(config-mac-acl)# deny 00c0.4f00.0000 0000.00ff.ffff 0060.3e00.0000 0000.00ff.ffff
ip
switch(config-mac-acl)# permit any any
Related Commands Command Description
mac access-list Configures a MAC ACL.
permit (MAC) Configures a deny rule in a MAC ACL.
remark Configures a remark in an ACL.
show mac access-list Displays all MAC ACLs or one MAC ACL.
To Next Page
Loading...
