Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference

Send comments to nx5000-docfeedback@cisco.com
6-46
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 6 Security Commands
ipv6 port traffic-filter
Examples This example shows how to apply an IPv6 ACL named ipv6-acl to Ethernet interface 1/3:
switch# configure terminal
switch(config)# interface ethernet 1/3
switch(config-if)# ipv6 port traffic-filter ipv6-acl in
This example shows how to remove an IPv6 ACL named ipv6-acl from Ethernet interface 1/3:
switch# configure terminal
switch(config)# interface ethernet 1/3
switch(config-if)# no ipv6 port traffic-filter ipv6-acl in
Related Commands Command Description
ipv6 access-list Configures an IPv6 ACL.
show access-lists Displays all ACLs.
show ipv6 access-lists Shows either a specific IPv6 ACL or all IPv6 ACLs.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English