Send comments to nx5000-docfeedback@cisco.com
8-64
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 8 Fibre Channel Commands
fcroute
The following example specifies the Fibre Channel interface, the route for the domain of the next hop
switch, and the cost of the route for VSAN 1:
switch(config)# fcroute 0x031211 interface fc1/1 domain 3 metric 1 vsan 1
The following example specifies the Fibre Channel interface, the route for the domain of the next hop
switch, the cost of the route, and configures the static route for a destination switch remotely connected
for VSAN 3:
switch(config)# fcroute 0x111112 interface fc3/1 domain 3 metric 3 remote vsan 3
Related Commands Command Description
show fcroute Displays Fibre Channel routes.
fcroute-map Specifies a preferred path Fibre Channel route map.
show fcroute-map Displays the preferred path route map configuration and status.
fcroute policy
fcroute-map
Activates the preferred path Fibre Channel route map.
To Next Page
Loading...
