Cisco AP775A - Nexus Converged Network Switch 5010

Send comments to nx5000-docfeedback@cisco.com
8-129
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 8 Fibre Channel Commands
scsi-target
The following example removes SCSI target ns-polling discovery for VSAN 1:
switch(config)# no scsi-target ns-poll vsan 1
The following example configures SCSI target on-demand discovery for VSAN 1:
switch(config)# scsi-target on-demand vsan 1
The following example removes SCSI target on-demand discovery for VSAN 1:
switch(config)# no scsi-target on-demand vsan 1
Related Commands Command Description
discover scsi-target Discovers SCSI targets on local storage to the switch or remote storage across
the fabric.
show scsi-target Displays information about existing SCSI target configurations.