Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference

Send comments to nx5000-docfeedback@cisco.com
8-134
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 8 Fibre Channel Commands
switchport ignore bit-errors
Examples The following example shows how to prevent the detection of bit error events from disabling the
interface:
switch(config)# interface fc2/1
switch(config-if)# switchport ignore bit-errors
The following example shows how to allow the detection of bit error events from disabling the interface:
switch(config)# interface fc2/1
switch(config-if)# no switchport ignore bit-errors
Related Commands Command Description
show interface Displays interface information.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English