Cisco AP775A - Nexus Converged Network Switch 5010

Send comments to nx5000-docfeedback@cisco.com
8-157
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 8 Fibre Channel Commands
zoneset (configuration mode)
Examples The following example activates a zone set named zSet1 in VSAN 333:
switch(config)# zoneset activate name zSet1 vsan 333
The following example clones a zone set named zSet1 into a new zoneset named zSetClone in VSAN 45:
switch(config)# zoneset clone existing zSet1 zSetClone vsan 45
The following example distributes the operational values for the default zone to all zone sets in VSAN
22:
switch(config)# zoneset distribute full vsan 22
Related Commands Command Description
system default zone
distribute full
Configures default values for distribution to a zone set
show zoneset Displays zone set information.