Send comments to nx5000-docfeedback@cisco.com
1-57
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 1 Basic System Commands
modem init-string
This example shows how to download the user-input initialization string to the modem connected to the
console port:
switch# configure terminal
switch(config)# line console
switch(config-console)# modem init-string user-input
This example shows how to remove the initialization string to the modem connected to the console port:
switch# configure terminal
switch(config)# line console
switch(config-console)# no modem init-string
Related Commands Command Description
line console Enters console port configuration mode.
modem set-string Configures the user-input initialization string for a modem.
show line Displays information about the console port configuration.
To Next Page
Loading...
