DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
82
Read/write or read-only level permission for the MIB objects
accessible to the SNMP community.
<community_string 32> − A string of up to 32 alphanumeric
characters that is used to identify members of an SNMP community.
This string is used like a password to give remote SNMP managers
access to MIB objects in the Switch’s SNMP agent.
<username 32> − A string of up to 32 alphanumeric characters that
is used to identify the group of MIB objects that a remote SNMP
manager is allowed to access on the Switch.
Only administrator, operate or power user-level users can issue this
command.
Example usage:
To create the SNMP community string ‘dlink:’
DES-1210-52/ME:5# create snmp community dlinkgroup dlink
Command: create snmp community dlinkgroup dlink
Success.
DES-1210-52/ME:5#
To remove a specific SNMP community string from the Switch.
delete snmp community <community_string 32>
The delete snmp community command removes a previously
defined SNMP community string from the Switch.
<community_string 32> − A string of up to 32 alphanumeric
characters that is used to identify members of an SNMP community
to delete. This string is used like a password to give remote SNMP
managers access to MIB objects in the Switch’s SNMP agent.
Only administrator, operate or power user-level users can issue this
command.
Example usage:
To delete the SNMP community string ‘dlink’:
DES-1210-52/ME:5# delete snmp community dlink
Command: delete snmp community dlink
Success.
DES-1210-52/ME:5#
To display SNMP community strings configured on the Switch.
show snmp community {<community_string 32>}
The show snmp community command displays SNMP community
strings that are configured on the Switch.
<community_string 32> − A string of up to 20 alphanumeric
To Next Page
Loading...
