DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
201
Example usage:
To show the scheduling mechanism:
DES-1210-52/ME:5# show scheduling_mechanism
Command: show scheduling_mechanism
QOS Scheduling_mechanism
scheduling_mechanism : Strict Priority
DES-1210-52/ME:5#
To enable setting the DSCP User Priority
The config dscp mode command enables the DSCP mode on the
Switch.
Example usage:
To enable the DSCP mode:
DES-1210-52/ME:5# config dscp mode
Command: config dscp mode
DSCP mode Success.
Success.
DES-1210-52/ME:5#
To enable setting the DSCP User Priority
config dscp_mapping dscp_value <value 0-63> class <class_id
0-7>
The config dscp_mapping command enables mapping the DSCP
value (the priority) to a specific queue (the class_id).
<value 0-63> –The selected value of priority. The value may be
between 0 and 63.
<class_id 0-7> – The class_id (queue) mapped to the priority. The
value may be between 0 and 3
Only administrator or operator-level users can issue this command.
Example usage:
To Next Page
Loading...
Need help?
General
